Single-Sided Hanging System

Hanging System for Single-Sided House Signs

An easy-to-use aluminum wall hanger comes free with every single-sided house sign. The following steps instruct you on how to install your sign:

1. Measure distance between hanging rails on sign (Fig. B).
2. Mark wall using above measurement. NOTE: When hung, top edge of sign rail will be 1/2 inch lower than wall rail (Fig. C).
3. Back off locking screws to remove top wall rail from sign. Mount wall rails to wall with flanges facing up (Fig. A). Identify suitable fixing points and use appropriate corrosion resistant fasteners for sign weight and wall type.
4. Hang sign onto wall rails making sure both rail flanges are fully engaged. Tighten locking screws (Figure B).